A4-70 bolt torque、Screw torque、A4-70 bolt torque在PTT/mobile01評價與討論，在ptt社群跟網路上大家這樣說
A4-70 bolt torque關鍵字相關的推薦文章
A4-70 bolt torque在Torque Values for A2 or A4 Metric Stainless Steel Fasteners的討論與評價
Torque Values for A2 or A4 Metric Stainless Steel Fasteners. Bolt. Dia. (mm). Dry. Lubricated. 3. 1.0. 0.9. 8.9 in-lbs. 8.0 in-lbs. 4. 2.6. 2.3. 23.0. 20.7.
A4-70 bolt torque在Stainless Steel Pre-load and Tightening Torques - TR ...的討論與評價
Thread Coeff Friction A1‑50 A2‑70 A4‑80 A1‑50 A2‑70 A4‑80 A1‑50 A2‑70 A4‑80 M1.6 0.1 0.4 0.55 0.55 0.1 0.1 0.2 0.15 0.2 0.24 M1.6 0.2 0.3 0.35 0.35 0.1 0.2 0.35 0.15 0.2 0.24 M1.6 0.3 0.2 0.3 0.3 0.2 0.25 0.45 0.15 0.2 0.24
A4-70 bolt torque在Recommended Assembly Torque Values * - Bolts Galore的討論與評價
Values given represent the torque required to induce a tension in the bolt corresponding to approximately 65% ... 304 (A2-70) /316 (A4-70) Stainless steel.
A4-70 bolt torque在ptt上的文章推薦目錄
A4-70 bolt torque在Stainless Steel的討論與評價
STAINLESS HEX BOLTS - RECOMMENDED TIGHTENING TORQUE (Nm). Nominal. Pitch. Stress Area. Class. Class. Class. Size. (mm). (mm2). 50. 70.
A4-70 bolt torque在Tightening torques for stainless steel bolts的討論與評價
This shows torque values in Nm for property classes 50, 70 and 80 as shown in the table below. This applies to 'grades' A1, A2, A3, A4 and A5.
A4-70 bolt torque在Torque Values for A2 or A4 Metric Stainless Steel ... - StudyLib的討論與評價
Torque Values for A2 or A4 Metric Stainless Steel Fasteners Bolt Dia (mm) 3 4 5 6 8 10 12 14 16 18 20 22 24 Torque (N-m) Dry 1.0 2.6 5.1 8.7 21.2 42 73 118 ...
A4-70 bolt torque在Preload and tightening torques | Bossard Group的討論與評價
Tightening torques for plastic screws / Polyamide 6.6. Approximate values for austenitic stainless steel A1 / A2 / A4. Fasteners with internal drives and ...
A4-70 bolt torque在A4 70 Bolt and A4 50/ 80 Stainless Steel Hex Bolts - Great ...的討論與評價
A4 -70 Bolt Tightening Torque ; M1.6, 0.2, 0.15 ; M2.5, 0.9, 0.6 ; M2, 0.4, 0.3 ; M3, 1.6, 1.1 ...
A4-70 bolt torque在Tightening torque and force for stainless steel - BUMAX ...的討論與評價
Punching screw-driving machines should not be used. ... Tightening torque Nm ¹, Bumax Ultra 159 ³ ... Bumax DX/SDX 129, 6, 10.5, 17, 24, 44, 70 ...
A4-70 bolt torque在STAINLESS STEEL - Mettex Fasteners的討論與評價
These specifications apply to fasteners (primarily bolts, screws and nuts) made from ... In the steel groups A2 and A4 class 70 is the most current.